You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 1260 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 6 posts

Monday, May 9th 2011, 7:37am

by dazed (Guest)

Thanks, but this thing is at the extreme back corner of my property, within inches of the property line corner. Nothing around but a field and my yard. I know there's PVC in that area because there's a rotating sprinkler very close by, but I could not understand why they'd have the pipe coming up and cap it off slightly above ground level. Now that I know what I have to do, I'm not worried about it--just a little curious.

Sunday, May 8th 2011, 10:04pm

by hi.todd

could be a cap to a sleeve to go under a driveway.

:thumbup:

Sunday, May 8th 2011, 5:46pm

by dazed (Guest)

Thank you for the responses.

Indeed it is a PVC slip cap. I can tell by looking at it more closely.

The ID seems to be 2". Unfortunately it does not simply slide off. I can't see any purple stuff so I'm unsure what they used to secure it. Doesn't matter anyway since I managed to damage not just the slip cap but the first 2" or so of PVC pipe it covers as well. I guess I have to remove some earth to get access, cut off the PVC pipe semi-cleanly (I know it doesn't need to be all that neat a cut since it's just getting covered with another slip cap), then put another slip cap over it.

I guess the good thing is that once I'm done, it will be too low to be nicked by another lawn mower!

Just out of curiosity, can anyone tell me why a PVC pipe might be sticking up and capped off at that location in the first place?

Sunday, May 8th 2011, 3:50pm

by Wet_Boots

Possibly a cleanout.

Sunday, May 8th 2011, 3:14pm

by mrfixit

It's just a slip cap. I can't tell what size it is. It might pull right off. Take it with you or measure it. Maybe you can look at it to see what size it is. It says right on there somewhere if the lawn mower hasn't destroyed that part.

The Home Depot or any irrigation supply store has them.

Sunday, May 8th 2011, 2:10pm

by dazed (Guest)

What did I just destroy?

I damaged something with my lawn mower, but I don't know what it was, so I have no idea how to go about replacing it. I'm 90% sure that the "something" was part of my irrigation system. Please let me explain:

In the corner of my back yard, there is a round, white plastic thing that sticks up about an inch above the ground level. It is located at the low point of the property, at the bottom of a slope.

In any case, I tore it to shreds with my lawn mower. After breaking it, I could see water inside it.

I've taken pictures and linked to them below in hopes that someone can help me identify this item and obtain a replacement. (In one of the photos, water can be seen inside.) Any advice (What it is, where to get another, installation caveats) would be greatly appreciated!

http://img848.imageshack.us/img848/5391/dsc00567j.jpg

http://img695.imageshack.us/img695/6849/dsc00568cp.jpg