You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 1296 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Thursday, May 5th 2011, 1:37am

by Mitchgo

Sounds like a broken wire somewhere in the field
Do you have a multimeter?

Ohm out that valves by touching the particular valve and the common, if you don't get a reading or an infinite number then you have a broken wire somwhere

As a tech, my next step would to simply wire trace out the line to where the break is, this may be more difficult for a homeowner. I know you can rent wire tracers, it may be easier to install a new wire from the controller to the valve box?

Wednesday, May 4th 2011, 5:01pm

by mebetodd

2 zones not working

Trying to fix a 4 valve system. 2 of 4 are working properly. The 2 that are not working wont turn on with the auto timer, however they will operate when I turn the bleeder or solenoid. I replaced the solenoid on both valves, re-wired all 4 zones at the box, still no luck with those 2 zones. I also checked connections at the control panel. Any suggestions?

Thanks