You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2607 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 5 posts

Wednesday, April 27th 2011, 7:57pm

by Wet_Boots

Where is your location? There isn't any good reason to not make your sprinkler system comply with the plumbing codes. Heads uphill of an antisyphon valve are a code violation, period, and represent a safety hazard. If you cut in an RPZ device upstream of the zone valves, you are covered no matter what.

Wednesday, April 27th 2011, 5:46pm

by wingsdomain

I'm learning as I go along so bear with me. :)

It would be nice to have the water seep out in addition to preventing my original issue with the placement of some sprinkler heads upstream from the anti-syphon valves which causes the leakage at the valve when the water is turned off. Does either of the 2 below options sound plausible?

1. I see now there is an auto drain valve available which is used for weatherizing. Does this valve when placed at the bottom of my sloped pipes basically automatically let water seep out when the water is turned off (without me doing anything)? If yes, can this work in my scenario?

2. Also, is there nothing to prevent the "non-popup" sprinkler heads from letting water out of the pipes when placed at the bottom of a sloped pipe? If so, can this be another "device" I can use at the bottom of my sloped pipes to allow water to seep out after the water has been turned off?

note, at the bottom of my sloped pipes is also an underground drain so excess water there is ok.

Thanks again.

Wednesday, April 27th 2011, 2:43pm

by wingsdomain

Thanks Mrfixit, looks like a good solution.

Wednesday, April 27th 2011, 12:24pm

by mrfixit

Try installing a King check valve right after your anti-syphon. I like to use a 1" check valve on a 3/4 inch line.

Wednesday, April 27th 2011, 12:05pm

by wingsdomain

Sprinkler head upstream from anti-siphon valve

I bought a house that's got an irrigation system with a couple of sprinkler heads upstream from the anti-siphon valve. The house is in the middle of a slope and the valves are at the front of the house. The upstream sprinkler heads need to be there to get to the top of the sloped areas. There are other sprinkler heads downstream from the valves as well. But it seems I am getting a slow leakage from the anti-siphon valves after the water flow has been turned off and I'm pretty sure it's due to the location of the upstream sprinkler heads.

Raising the anti-siphon valves to eliminate the upstream situation will require the valves to be about 5-feet above the ground and this is right at the entrance to the house so I don't want to do that. Moving the anti-siphon valves to a location above the upstream heads would mean the valves are sitting next to the sidewalk which I don't want neither.

So is there an elegant way to keep the layout but somehow relief the water pressure downstream after the water has been turned off? Is there a component that can be installed downstream that would allow water to seep out once the water has been turned off? Are there sprinkler heads that don't require much pressure I can install at the bottom of the slope so that water can continue to seep out after the water has been turned off? Any solutions would be appreciated. Thanks.