You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 1260 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Sunday, April 10th 2011, 4:14pm

by Wet_Boots

How about a photo of the existing manifolds? Your specific setup might have a specific solution.

Sunday, April 10th 2011, 2:01pm

by Mitchgo

I personally wouldn't ever use a pre-made manifold..

But then when I run into them on the field, I've yet to see too many problems with them.
One thing I would think about is your water pressure, What's your psi? Many of those pre-mades are just a plastic union with a o-ring. Those valves are fast closing valves, with higher water pressure I could see the union becoming loose overtime as the valves closed

In my opinion I prefer Rain Bird over hunter. I recommend the Rain bird DVF-100 which is a solid residential valve.

Sunday, April 10th 2011, 8:59am

by ohiorebel

Valve replacement project

My home sprinkler system is designed with two valve boxes, one in the front yard and the other in the back yard. Each valve box has a PVC manifold with 4 custom sections and 4 toro valves (flow master or something like that). The valves have been leaking for years, but have now got to the point that one station will not shut off in its normally line up ( i had to switch valve 5 with valve 8 so that after the watering cycle it would shut off. So this year, I plan on swapping the valves out. I thought it might be simpler to purchase a pre made premium valve manifold kit from sprinkler warehouse. I'm looking for a recommendation on the valves, as I stated above, I currently have 1 inch toro's and prefer to change them to hunter or rainbird.

So any pros or cons with using the pre made manifolds with valves included?
Which valve will serve me better Hinter or rainbird?

Thanks in advance