You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2627 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Saturday, April 9th 2011, 12:36am

by mrfixit

If the valves are getting power then they probably need new diaphragms. It sounds like you have a lawn genie and a watermaster valve.

If there's no power look for loose wires. The ground wire that controls those two valves might be loose at the controller or anywhere.

Friday, April 8th 2011, 5:31pm

by amcgahan

2 zones not working have replaced solinoids already

So I dont much about this system it was installed before we bought the house i can tell you that it is an orbit system model #57881 and both zones turn on differently...Zone one has to be manually turned on by a little black screw and water leaks out of it when you turn it Zone 2 is turned on by a valve next to the solenoid and zone 2 you can hear massive water rushing

Friday, April 8th 2011, 11:49am

by mrfixit

If the valves are getting power from the controller then the valve itself need repair. If I knew which valves we're talking about I could give you specifics.

Thursday, April 7th 2011, 8:15pm

by amcgahan

2 zones not working have replaced solinoids already

We have a 6 zone system zone 1 and 2 are not working we have replaced the solenoids and the zones do not work by the controller they have to be manually turned on...please help