You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 1297 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Wednesday, April 6th 2011, 9:17am

by Wet_Boots

we like photos :)

Wednesday, April 6th 2011, 1:48am

by Mitchgo

you'd have to post a picture for us to say how to do the repair..

but Yes, there is more then likely in the vicinity of the back flow preventer and the valves there are both slip joints and threaded joints.. basically it's cutting it , rebuilding it..

as far as the shut off goes, your backflow preventer Should have a shut off on it..

Tuesday, April 5th 2011, 5:34pm

by Mooney

Leaking valve joint

Never installed a sprinkler system but bought a 25 year old house with 15 automatic valves all RICHDEL. I did replace a rubber diaphram once years ago and a couple of solonoids over the years just simple stuff but now i have more difficult issues and not sure what to do.

First off there is no water shut off valve at the valve head manifold in the rear of the house, so i have to go out to the curb in front and use the 2 foot main water valve handle shutting off all the water to the house in order to work on any valve. Seems to me that a shut off valve at the manifold would be a nice feature to have. Is that not commen practice and if not why not?

Here is my current problem--- there is a leak in the connection between the valve and the backflow preventer. There is a joint between the two and a crack or something has developed underneath so it drips a lot. the valve itself does not leak. This looks like a replacement issue rather than a repair, but I don't know how the two devices are connected togther i.e. a slip joint with glue or screw type joint. Also i cannot determine how the assembly is connected to the vertical PVC pipes? In simple language how do I remove and replace? These are above ground about 8" and easily accessible. I do not see any way to remove them short of cutting them off the pipes. My wife is ready to call the local sprinkler repair man but I won't give up without at least asking first. Any advice appreciated.