You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 1410 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Tuesday, September 21st 2010, 1:50pm

by Wet_Boots

Blockage. You might need to reverse-flush the line.

Tuesday, September 21st 2010, 10:02am

by lfawcett

No Pressure to Sprinkler Head

Anyone heard of this?
I went to replace a sprinkler head to get better coverage.
I took off the old, installed the new rotary head.
When I turned on the zone, the flow was weak.
So I took off the new head and cleaned it out and flushed the line.
When I put the new head back on, no flow at all.
I took off the new head and turned on the zone again. The OTHER heads working fine, but now I have NO water pressure to this head.
What did I do wrong? How can I fix it?
Thanks for your suggestions!