You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2873 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Friday, August 6th 2010, 3:44pm

by ReddhEad

Thanks, I appreciate your input. I'm going to re-design it and add one to the upper left and re-do the bottom from right to left instead.

Friday, August 6th 2010, 3:38pm

by mrfixit

I don't normally answer design questions. I would like to suggest you put a sprinkler at the top left corner of this drawing, the jpg3. Also in the section at the bottom right of jpg3. The top right corner of that section I'd start there with my layout and work left so there's a sprinkler in the corner. The way you have it you'll be spraying the street trying to keep that corner watered.

Friday, August 6th 2010, 2:29pm

by ReddhEad

Sorry... forum software is really making this difficult to get the link working.

** I give up. The link just won't go through properly.

Friday, August 6th 2010, 2:25pm

by ReddhEad

Critique my layout?

So, I've been playing around with plotting my sprinkler system heads and zones. I was thinking about using Hunter I-20's with precipitation matched nozzles for the large areas and haven't decided what I should use for the lower section of the diagram. I have about a 12ft section between the house and the property line. I have thick skin so feel free to tear apart my design. I tried dividing the property into rectangular sections but I have trouble "joining" the sections together to get even coverage. I only have 7.25GPM @ 59psi coming out of my outdoor spigot which is kind of worrisome. It does go from 1" PEX to a peice of 6 foot 1/2" PEX before it reaches the spigot. Maybe that explains my low GPM. I'm hoping I can get at least 4 heads on each zone with a 1" main line.