You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 3025 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Saturday, August 7th 2010, 9:40am

by Wet_Boots

Ask the well guy what the steady-state performance is. A well that regenerates slowly (this refill-rate is a number you should know) may have to operate for a while, then rest for awhile.

Thursday, August 5th 2010, 12:30pm

by Daryl1983 (Guest)

sprinkler system not working

System has pressure. When opened up water pressure depletes rapidly. No zones even have the heads pop up. There is a hose bib on the main valve of sprinkler system and that puts out water, but not at a good rate. I have had 2 repairmen to look at it and they are stumped. Could the well not be regenerating? Could there be a leak under ground between zones/valve boxes? When the valve inside the house is shut off, we have never had any loss of pressure, or water. When the system was operating we could only run it for 45 minutes because the pressure would be depleted. According to the well guy, the system showed 12gal/min and should regenerate at 40 psi. It normally is around 50-55. Help!