You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 1582 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Friday, July 30th 2010, 9:45am

by panchor (Guest)

Thanks for the reply. Yes, the sprinklers connection is near the water meter. Where do I need to install the check valve? Near the expansion tank, near the sprinkler connection?

Friday, July 30th 2010, 5:30am

by Wet_Boots

Assuming the sprinklers connection is near the water meter (or at least "upstream" of the water heater) it should be that a check valve would stop the backwards movement of water from the expansion tank. When a zone is first opened, the expansion tank momentarily has higher pressure than the sprinkler supply.

Thursday, July 29th 2010, 3:18pm

by panchor (Guest)

Pipes banging when sprinklers are on

I just have a water heater installed and since then, every time i turn on my sprinklers or they change zone, the pipes in my basement near the water heater start banging for a few seconds. The plumber also installed an expansion tank next to the water heater.

I noticed that if I close the valve that feeds water to the water heater, the banging does not occur. So the problem is either the water heater or the expansion tank.

Does anybody know how to fix it?

Thank you