You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 1383 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Saturday, July 10th 2010, 10:06pm

by mrfixit

Maybe the solenoid is in the on position. Maybe the solenoid plunger is stuck open. Maybe the flow control is open too far. It could still be the diaphragm even without a hole in it. It might be old and stiff.

Saturday, July 10th 2010, 9:16pm

by SConrad (Guest)

Zone 4 runs whenever the main water valve is turned on

Hi - After turning the system on for the first time this year, zone 4 operates whenever the main water line to the system is pressurized even when the controller is turned off. I checked the diaphragm on the valve for damage but found none. I am not sure what else could be wrong. Thanks.