You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 1533 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Friday, June 18th 2010, 10:49pm

by hi.todd

If the contractor got trash in the mainline while the valve was being replaced it could stick a valve open. This would happen right away. If a contractor replaced a valve he or she should have checked the entire system to make sure that none of the valves stuck open. I agree that coincidences are not that common in irrigation repair. The valves that aren't turning on or are irregular may be a separate issue or while the contractor was working on the other valve he or she may have cut or loosened the connection of the cable that go to the rest of the system and that could account for the irregular operation.

Good Luck :thumbsup: :thumbsup: :thumbsup:

Wednesday, June 16th 2010, 2:10pm

by mrfixit

No I don't think that's normal. Sometimes things do break right away but it's a coincidence. I had a main line burst one time while I was standing there talking to the home owner. I hadn't touched a thing yet.

Drip line is tricky. If there's not enough flow through the valve it may not shut off all the way or at all.

From my perspective you might want to find another sprinkler guy.

Wednesday, June 16th 2010, 11:02am

by SprinkerNewbie (Guest)

Could a valve replacement cause other valves to break?

Hello,

My drip system was no longer working and I had a company come out and determine that the valve needed to be replaced. Once this work was completed all three of the valves controlling the sprinkler system were broken. One stays on constantly and the two other zones come on for about 10 seconds each time randomly. Usually every 15-30 minutes.

I was told that other valves in a sprinkler system often break when one is replaced. Is this true? If so, why does this happen?

Thanks,

Kelly