You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 1588 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Wednesday, May 26th 2010, 1:31pm

by mrfixit

It's definitely a valve problem. Water can't get to those heads unless it gets past the valve. So you have a leak through the valve coming out the lowest heads on the line. Most likely something's wrong with the diaphragm. On occasions there are pits/pit on the seat or a small crack.

As far as finding the valve the easiest way is to use a wire locator. First you should do a thorough search. Follow the wires. Poke around with a screwdriver in a logical spot. Have someone turn on and off the controller and see if you can hear the valve. Possibly the clicking of the solenoid.

Good luck!

Wednesday, May 26th 2010, 1:14pm

by ajkr711

Lots of Water Around Heads

I recently discovered that around a couple of the heads in my system, there is a significant amount of water (almost burying the head entirely) that builds up when that zone is turned off. The zone is made up of 10 spray heads and the one with lots of water is the end head in the zone, where the grade starts to slope downward towards the back yard.

My first thought was that it was a problem with the head. I changed the head and that didn't appear to be the problem. All of the heads in the zone work well (except the fact that all of them don't go down all the way, but those probably have some dirt in there) and the pressure is good throughout the whole system.

Any help would be appreciated. Also, I have only been able to find one valve box and that one is right next to the vacuum breaker. Any suggestions as to how to find the others?