You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2932 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Sunday, May 16th 2010, 8:04am

by Wet_Boots

Check the wiring for resistance. If it tests okay, you can bypass the controller and power a zone directly from the transformer.

Saturday, May 15th 2010, 10:56pm

by pk125

Sprinklers go on and off

I have an orbit 6 station controller. Using only 5 stations. Turned system on for summer and the sprinklers come on then go off(run about 30 seconds). All 5 stations do this even on manual. Checked the continuity on all wires good. Have 24v going into controller. What else can I check. Controller does not show that it is having a problem. It is 10 years old