You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 1634 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Friday, April 30th 2010, 11:22am

by Higgy

Thanks for the Response

Thank you for the feedback. That is what I was suspecting too. I just wanted to hear from someone else if I was thinking about this correctly. Your point about replacing the Head (should it fail) makes perfect sense too :rolleyes: .

Monday, April 26th 2010, 8:16pm

by pass1

It's a good idea to use the bottom inlet for the very reason you stated.
sometimes you cannot be assured that all the water is out of the canister when you blow it out. It can then freeze and crack. Also, it is much easier to replace an entire head if it is bottom fed should you need to.

Monday, April 26th 2010, 5:41pm

by Higgy

Use of the Side Inlet on a Rainbird 5006-PC

I'm building a fairly large Sprinkler System and have ordered the Rainbird 5006 Rotors. I'm considering connecting these Rotors via the 3/4" Side Inlet with the 12" Hunter Swing Joint. I've seen warnings that you should refrain from using the Side Inlet in freezing climates. I live in Colorado and typically blow-out my system prior to the winter to avoid having costly sprinkler repairs so I'm wondering if the warnings I've read only pertain to people that do not drain their sprinkler system. Prior to ordering the Swing Joints I'd like to get feedback as to whether it is better to use the Side or Bottom Inlet in the Rainbird 5006. Thanks :rolleyes: