You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2974 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Wednesday, April 28th 2010, 6:37am

by Percy

Try checking near your water source. The irrigation system is often connected to the house water rather than a pump. If so, there may be a back flow preventor. You can find that where the municipal water meter is attached to the house. Once you have found that try probing in the ground with a long screwdriver or something similar, but do it carefully so you don't puncture any pipes. If you find anything that is about six inches in diameter under the surface then that should be a valve. You can do the same thing if there is a sprinkler timer, search that area.

Tuesday, April 20th 2010, 6:54am

by Wet_Boots

If you don't know where the control valves are located, you can rent a wire locator. If you have the control vales located, that covers most of what you can do. Plastic pipe isn't easily tracked by electronic means.

Monday, April 19th 2010, 8:31pm

by kcm

locating existing underground irrigation pipes?

This may be a dumb questions but does anyone have advice for locating existing underground irrigation pipes? The former homeowner had a system installed and some of the areas work okay, but others need upgrades. I want to try to locate the existing pipes. Any tools I can rent that would locate the existing network? Thanks for any advice.