You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 3254 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Monday, July 27th 2009, 3:35pm

by Wet_Boots

Swap heads. You did buy some extras, right?

Monday, July 27th 2009, 1:35pm

by dmqblueribbon

Leaking Rotors

I am in the process of switching out old Toro 500 series rotors with new super 800 rotors on an existing system, 19 total on 6 zones ( no more than four rotors per zone ). After changing and testing each rotor I have a problem in two of the zones with the new rotors one in each zone leaking water and not popping up. I spoke to Toro and they told to turn on the zone with the problem, manualy pull up the head and then gently step on the head and pump it up and down four times and this should fix the problem. I did this but it did not fix the problem, could I have a bad rotors? any suggestions would be appreciated