You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 1937 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Sunday, July 5th 2009, 12:46pm

by mrfixit

Try this

If you're positive the programming is correct try this. When the C program comes on and you have two valves running at the same time, disconnect the wire from the station number 1 terminal and see if the valve shuts off. If it shuts off then the controller is telling it to run and the controller is the problem. If it stays on you have a wiring issue. If you have a wiring issue I would suspect that the dripline would come on when station number 1 on the A program starts. If you determine it's the controller you could try abandoning the number 1 terminal incorporating the number 5 terminal.

Sunday, July 5th 2009, 10:20am

by trapkoch

HR 6100 - both A & C stations running simultaneously

I'm using a Hardie HR 6100, with three stations on A and one station (drips) on C. When the C program is activated, however, the first station that is assigned to A also comes on. The programming seems correct (stations 1, 2, and 3 are only scheduled on A, only section 4 is scheduled on C). Thanks in advance for any advice!