You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 3215 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Monday, June 29th 2009, 11:28am

by HooKooDooKu

Without knowing any of the details of the specific kit, here's the main things to keep in mind and check...

From what I've seen of drip irrigation kits, some of the connections will be Hose Threaded (MHT & FHT for Male & Female Hose Threaded connections), and some of them will be standard Pipe threaded (MSPT & FSPT for Male & Female Standard Pipe Threaded connections). As an example, I've seen where the back flow preventer will be FHT x MHT and the presure regulator was FHT x FSPT and the filter MSPT x MSPT. The only way these can be connected is to have a FHT end of the back flow in the hose spiket, the pressure regulator, and then the filter. Any other order doesn't match the FHT to MHT and FSPT to MSPT.

Note that hose threaded connections are assumed to be sealed with a washer, so each HT connection should have a rubber washer for sealing. If it doesn't, then that's your problem. On the other hand, SPT connections usually do NOT have any sort of rubber washer to seal (though I have seen some with things like shower heads). If you seem to have a leak at a SPT connection, try getting some plumbers tape (white teflon tape about 1/2" wide) and wrap it around the FSPT threads about 5 to 7 times and then connect the things together.

Of course the other thing to keep in mind is that even though all these items are DIG, they might have changed the design and therefore the old kit may not go together the same way as the new kit.

Additionally, when trying to determine Hose Threaded v. Standard Pipe Threaded, the two will go together for a couple of turns, so you really need to look at the threads closely to make sure you are connecting the right types together.

Monday, June 29th 2009, 6:43am

by K2 (Guest)

And I posted this in the wrong forum to boot. I"m batting 1000.

Monday, June 29th 2009, 6:39am

by K2 (Guest)

DIG brand backflow and pressure reg spewing

I recently installed a new DIG R750 micro prinkler kit for use in a relatively small flower bed area. The kit comes with a plastic anti-siphon backflow fitting, and a plastic pressure regulator. The BF device started spewing water out of the sides, and then a small stream of water appeared out of the pressure regulator. I have the same kit installed on another hose bib out back of the house, which has never given me a problem. When I switched them (back of house to front and vice versa), the problem followed the fittings.

So is this a malfunction of the BF device, the Pressure Reg, or both? They're both brand new, out of the box. I have a message in to Sprinkler Warehouse Customer Service already to see if I need replacement parts from DIG, but thought I'ad ask here. Couldn't do a "search" on the forum, sorry if this is a common prob or redundant post, I just couldn't find anything when I perused the forum.