You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 1981 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Friday, June 26th 2009, 8:58am

by Wet_Boots

Try another fuse first.

Friday, June 26th 2009, 8:18am

by Bill Pajerski

LCD will not light up on the Controller

I have a SRC-6001 Controller. I started up my system and Zone 1-2 and 3 went on then it went to Zone 4
and the Fuse blew on the system I replaced the fuse with a .75 amp. When I plugged in the system the LCD
would not light up I checked the main power and got 120v then I plugged in the transformer and it still would
not light up. The Controller box is 10 years old, do I need a new Controller box and if so can I replace it with
a Rain-Bird Controller.
Thank you