You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 3282 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Friday, June 26th 2009, 8:53am

by Wet_Boots

Over-the-air transmitters no. Powerline transmitters, like the x10 system, yes.
But this is all a bandaid, since you should have a better control setup. Consider a pressure tank in conjunction with a pressure switch.

Wednesday, June 24th 2009, 10:26am

by Pscotmyers

Remote relay switch

I have a system with 2 controllers and a lake pump. Right now I am using a pressure switch to kick the pump on. I am going through a lot of switches and impellors.

Here is my question.

Both controllers have a Master Valve option. One controller is very close to the pump but the other is too far to feasibly trench for a control line.

Is there a way to hook up a remote transmitter to the master valve leads to activate a relay switch at the pump? And if so, how do I find this equipment?