You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 3299 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Tuesday, June 9th 2009, 6:19pm

by mrfixit


Usually when a sprinkler head wont stay on the threads on the riser are bad. Could also be the threads of the fitting. Could be a cracked fitting and yes it might be the sprinkler itself. Might be more than one. My money's on the riser.

Tuesday, June 9th 2009, 2:54pm

by JD (Guest)

Blown Off Sprinkler Head

One of my zones has a sprinkler head that has blown off and all the water when that zone is on is gushing out of that hole. Do I have to replace the entire sprinkler head?