You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 1878 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Monday, June 1st 2009, 9:08am

by HooKooDooKu

I'm not understanding your logic. By that, I mean exactly what sort of a product are you looking for. The reason I say that is on the surface of it, if you are going to add zones to your existing one-zone system, you will have to either run more pipe from the hose bibb to the 2nd zone, or you are going to need to install multiple valves down the existing water line where you want to split off additional zones. Installing multiple valves down the line is going to either require that you run some burried wire out to the valves (cheap) or have some sort of battery powered valves or remote control (wireless) valves. While such things do exist, unless you are talking about miles of wire, running some burried wire seems cheaper.

My personal suggestion would be to ditch the black pipe (if this is something simply laying on the ground) and install some true burried irrigation pipe (like white PVC pipe) from the house to the garden, and install a burried manifold out by the 1st garden where you want to start splitting the water to the various zones. While you have a trench open from the house to the 1st garden, you can install the wiring needed for the manifold out in the garden. It so far sounds like a very much DIY sort of project, and can possibly be done for about $200 (depending upon what you have to do for the trench). Obviously the trench can be hand dug for the cost of a shovel and asprine for you back. If the ground isn't too hard, places like Home Depot have some simple trench diggers that rent for $50 or less (it works sort of like a saw blade, cutting into the soil, but you have to provide the muscle to push it forward). If you have some really hard soil, then you'll want to spend the $125-150 to rent a full blown trencher for the weekend. They have blades that can cut 24" deep (twice as deep as you would need to consider) and move forward (actual backward) under their own power. They can initially look intimidating to operate, but if you only need to dig a strait trench they are not very difficult.

Friday, May 29th 2009, 1:51pm

by SSzretter (Guest)

irrigation splitter?

Is there such as thing as hose (or irrigation pipe) timer that will switch a single water input line to multiple output lines (zones)? (for example 30 of 60 minutes for each zone)? (battery or no power)

I currently have a simple hose timer at my house with black irrigation pipe run 100 feet to a garden, and a splitter from there another 100 feet to another garden. This is working fine with the sprinker/drip emitters, but I am going to need to expand. I will need to add a 'zone' , and in the future more zones, but I really do not want to have to run new pipe all the way out there, or electrical...