You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2036 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Tuesday, March 24th 2009, 9:41am

by manifold (Guest)

thank you! I was able to contact the manufacture and they said their fittings are made to be hand tight with no tape.

Monday, March 23rd 2009, 4:05pm

by mrfixit

O-ring

Hi, the O-ring is all you need. I'm not a big fan of premade manifolds but if you gotta do it then you don't need the tape on what you've described.

Monday, March 23rd 2009, 12:26pm

by manifold (Guest)

Dura Manifolds

I'm installing a Dura manifold. The O-ring appears to seal the connection but should I also use Teflon tape. My thoughts were that by adding teflon tape it would secure the connection and prevent the male pipe from seating on the O-ring. I have found conflicting information on this and I want to install this without having to worry about leaks.