You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 1692 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 7 posts

Wednesday, May 5th 2010, 1:48pm

by mrfixit

Thanks for the spam Percy. I'm thinking the average homeowner who comes to this site doesn't want to shop at an online store geared towards the agriculture industry. Here's the link I recommend.

www.sprinklerwarehouse.com/

Saturday, March 21st 2009, 4:06pm

by sanzen96

if your system was installed last year, a good company would include a spring turn on for free the first year as any good reputable company does.

Thursday, March 12th 2009, 10:45am

by HooKooDooKu

RE: I may Be the wrong person to answer...

As a contractor, I would always recommend having a pro do it. There are alot of little things like adjustments that need to be done. Timing, opening the water supply slow, are a few more. For the hundred dollars or so it costs, it is well worth it. If a plant dies or a piece of grass dies, what does that cost. Leave it to the pros. Just my thought.
http://www.irrigationsolutions.com
:D

If your system is in such bad shape that adjustments are needed to keep from having plants or grass die, then perhaps you do need a professional.

Wednesday, March 11th 2009, 2:00pm

by irrigation solutions

I may Be the wrong person to answer...

As a contractor, I would always recommend having a pro do it. There are alot of little things like adjustments that need to be done. Timing, opening the water supply slow, are a few more. For the hundred dollars or so it costs, it is well worth it. If a plant dies or a piece of grass dies, what does that cost. Leave it to the pros. Just my thought.



http://www.irrigationsolutions.com



:D

Friday, March 6th 2009, 12:20pm

by RMO87

Yes, I have a backflow preventer (in fact, I have to schedule it's required annual test this month). I have no drip irrigation, so I won't have to worry there. Thanks for your info. And yes, I am in a cold climate, so must have the pipes blown out each fall.

Ryan

Thursday, March 5th 2009, 12:53pm

by HooKooDooKu

In theory, it SHOULD be as simple as turning on the main irrigation shut-off valve and turning the controller on.

But it CAN be more complex than that. One big part depends upon what had to be done with the backflow preventor (your system does have a backflow preventer right?). If it was disconnected from the system (something that some people do in cold climates), it would have to be reattatched. If the test cocks were openned for drainage, they would need to be closed before turning on the main shut-off valve. If any of the shut-off valves on the backflow preventer were closed, you would have to open them. If you have a pump, perhaps there are things that have to be done to it before you begin using it for the 1st time of the season. If you have one of these fancy programable controllers that perhaps allows for multiple schedules for different parts of the year, then the controller has to be set for the correct program. Then there is the question of drip irrigation. If there is drip irrigation associated with the system, then there might be drip tubing ends that were left open for drainage purposes that need to be closed.

Otherwise, there is GENERALLY not as many things that can go wrong starting your system back up compared to winterizing it. MOST irrigation systems should be darn near impossible to break by simply turning the system 'ON'. Perhaps the biggest thing is running the system through its paces so that you can check for any damage that has occured over the winter (perhaps from water freezing in a pipe, backflow, or valve that didn't properly get winterized).

About the only thing I can think of that might go wrong is if the system needs some sort of flushing out... and if it doesn't get flushed out, something might get clogged up. An example of that would be if there was drip irrigation included in the system, and drip tube ends were left open. Well, some critters could have climbed in there and taken up residence. You would want to run that drip system with the ends still open to flush out stuff like that before you close it off.

Thursday, March 5th 2009, 11:55am

by RMO87

Irrigation System - Spring Opening question

Hello,
I had a new irrigation system installed last year. Is preparing the system for operation this Spring something I should be able to do myself?

Does anyone have any tips so as to not cause any damage? My system is a Hunter with six zones.

Thanks in advance!
Ryan