You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 3377 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Saturday, March 21st 2009, 3:55pm

by sanzen96

before you do anything, open up the panel. there is a ribbon cable that runs from the panel to the base (the part that is mounted to the wall with all the zone terminals in it) make sure that the ribbon cable is connected to the base. the panel disconnects from the base easily for easy panel swapping. make sure the ribbon cable is connected securely. also make sure that the 24v transformer is attached to the screw terminals in the base. they say 24v on them. there are 2 of them. also make sure you have power to the outlet you are using. if still nothing, replace the transformer, with another 24v transformer. if still nothing, then you need a new timer. good luck

Wednesday, February 25th 2009, 11:08am

by Wet_Boots

The old Rain Dial controllers can be repaired at the factory. Call them and get a price. Or, as suggested, replace it with some big-box cheapie. Or, you can even purchase a replacement right here .

Tuesday, February 24th 2009, 11:42am

by Brie (Guest)

Blown Rain Dial

Just bought a house and the rain dial controller doesn't work. There's power out to it...but the controller doesn't turn on...unless the battery back up is in...and then it doesn't turn on any valves. Someone was saying it might be a blown fuse...but I can't find a place for a fuse - it's an older model rain dial. Is there any possibility of salvaging it? Or do I just have to buy a new one?