You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 3561 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Monday, September 22nd 2008, 4:21pm

by Lowvolumejeff

Deactivate? Need a little more info.

I am assuming you wish to turn off several of your roters on a zone, while continuing to use others on that zone.

Is this temporary or is it a permanent desire?

Partial answer. I do use Rainbird 5000 plus, where the plus signifies the ability to turn off the head by turning a screw on top. I searched the web, and find no mention of the Nelson 6000 having that ability. Bummer :(

So will yield to others with more experience if they say there is a way to turn off individual heads.

That said, if you wish to make this permanent, depending on the heads place in the lateral line, you can either remove the ones you want to "turn off" and place a cap over the riser, or swing joint male threads entering the head. Obviously,if you are abandoning a distal group of heads, you can cut the line after the last head you will be using, and cap it off.

If shutting off some of the heads effects their performance (misting) hopefully you have a flow control on that valve that can be used to adjust the remaining heads output.

Good luck, Jeff

Monday, September 22nd 2008, 12:30pm

by barryc

need to deactivate certain nelson 6000 rotors ona line