You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2336 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Saturday, April 26th 2008, 10:37pm

by HooKooDooKu

Stepping up to a bigger size means less pressure loss due to pipe friction.

Does that mean better? Well it depends.

Layout your system. Then work out the pressure losses using 1" pipe. If you've desiged for a pressure of 30psi, and pressure losses indicate that you've still got 30psi when the water reaches the spray heads, then increasing to a larger pipe is just spending more money.

If calculate pressure losses indicate you won't have 30psi (or what ever value you're designing for) remaining when the water reaches he spray heads, then increasing the size of the pipe may be required to increase pressure at the spray heads. Larger pipe is also suggested if your design with smaller pipe requires the water to be travelling at or above 5ft/sec. If so, then larger pipes will reduce the velocity of the water and reduce the chances of water hammer.

Saturday, April 26th 2008, 11:38am

by tonka truck (Guest)

pipe, is bigger better

I have a 1" comming off my well andto the outside of my house, is there any advantage to stepping up to a 1 1/4 poly for the main, I am irrigating about a 150'x 250' area

thanks :)