You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 3687 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Sunday, April 20th 2008, 4:13am

by Wet_Boots

Not enough information - what pressure and filtration is feeding what size and length of tubong?

Saturday, April 19th 2008, 1:32pm

by stevew (Guest)

drip system - no pressure

I have an emitter that is on a hibiscus and not emitting anything. If I pull out the "small tube" that is attached to the "main tube" (underground), there is some water coming out - enough to make a very small "spout", so I changed the "small tube" with a "fresh one" and a new dripper head. When I attached it and turned on that station again, there is still no water coming out of the emitter. I wonder if it is a pressure problem? I have plugged 2 emitters that were getting good flow on the same line (but closer to the water source). Any ideas on what to do to solve this problem?