You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Friday, June 29th 2018, 9:58pm

by mrfixit

You must have a low angle nozzle in the rotor. I've found that the Rainbird's shoot very high.
Try googling nozzle charts. Or 5000 nozzle. You'll see the different types.
Yes the nozzles change the flow rates, angles and spray patterns depending.

Friday, June 29th 2018, 6:00pm

by BobinNH

I can't believe no one knows this answer


Thursday, June 28th 2018, 4:48pm

by BobinNH

Question on nozzles and getting the proper height of the flow.

Rainbird 5000. Can someone explain what nozzles do? Do they just restrict the flow of water from n gal/min to .5gal/min or do they adjust the type of spray you get?
I need to increase the height of my spray. The head comes up a good four or five inches above the turf but the water seems to come out almost horizontally. I want it to go higher, not be four feet off the ground for the whole way!
Is my issue one of the proper nozzle or some other adjustment? (I've tried the front screw that supposedly restricts the radius of the spray and that gives a different type of spray but doesn't help my height issue.