You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2667 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Thursday, August 2nd 2007, 3:36pm

by dsc

Thanks for the response. I've got a plumber coming tomorrow - I'll check it out with him too.

Thursday, August 2nd 2007, 12:40am

by SprinklerGuy

yes the spigot can reduce the flow tremendously....3/4 pex is approx 11gpm...

Wednesday, August 1st 2007, 3:52am

by dsc

one change - called the plumbers that did my house
the line from the meter to supply the house is
3/4 PEX

Wednesday, August 1st 2007, 2:42am

by dsc

Low GPM

I measured the GPM at my house and got a low result of around 5.8 GPM.

-city wayer
-meter is 5/8.
-supply line is 3/4 PVC (i think)
-made sure all water was off
-measured at outside hose bib
-took 24.6 seconds to fill 2.38 gallon pail (9 liters)

Any ideas whats up? Could the hose bib restrict the flow?

Thanks
dsc