You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Friday, June 29th 2018, 6:41pm

by stonecoldsteve1

Toro Vision 1 sprinkler system controler

The power supply has three taps ( O, 15, 24). The three colors of the conductors are white, black, red. What is the proper connection from supply to controler? As of now the first screw has (G/Y) is red, second screw is(G/B) white, next is (G) black. What are the voltages for the G/Y and the G/B?

Tuesday, June 19th 2018, 11:15pm

by mrfixit

I'd reset the controller as per the manual back to the factory settings. Then reprogram and see if it works.
I think you meant Rainbird ESP-12.

Tuesday, June 19th 2018, 1:04pm

by Bear3

Rainbird Lsp works on manual but not automatic

Have a Rainbird LSP-12. Had a power outage. Reset all the dates, time, start time. Controller will only work the program's A and B on manual. Any help would be appreciated.