You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2172 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Monday, May 12th 2008, 4:25pm

by HooKooDooKu

RE: Sprays installed below ground level....

Just had a professional company install our system...


Doesn't sound very professional from the description you give.

There is no reason for the heads to be installed right up against any paved surface. The need to be moved. (But given what you've said so far about this "professional", don't expect him to do it for free).

Every instruction book I've ever read always talks about having the heads of a newly installed system ever so slightly above grade level to allow soil/dirt buildup to avoid sinking them into the dirt (which can quickly lead to heads that don't properly retract).

"Green backflow values" ??? What are you talking about? An irrigation system should have a backflow preventer (to avoid irrigation water from contaminating your drinking water... assuming they come from the same source). As for the On/Off valves, they can completely buried and function just fine... but it makes for a maintenance headache if anything every has to be done to them. If you are somehow referring to anti-siphon valves (sort of valves with backflow preventers combined), then the anti-siphon part can not be covered and must be about 1' higher than the highest sprinkler.

Monday, May 12th 2008, 10:39am

by North Tx JIm

I have seen some head protectorts made of hard plastic or metal at Home depot.

Wednesday, June 20th 2007, 5:08pm

by pixietwin

Sprays installed below ground level....

Just had a professional company install our system. The yard is relatively small so we have all sprays. It was installed last Wed and the first scheduled run was last Friday morning. Friday evening a pipe cracked and we had a large leak that ran for hours. Anyway, it took until today to get it completely repaired. Not a hampy camper with company. While he was out looking at that, I pointed out that about 10 heads were below ground level to the point that they were completely covered with clay. Our house is 2 years old and they trucked in a combo of red clay and sand for fill dirt. No topsoil. So,these heads are covered and he refused to install risers. He said that they are fine. Also, a few of the green backflow valves wound up being filled halway with the clay because the trenched areas drained directly into the holes as a result of a day of rain. He said that this is totally normal. DH and I said that sure some dirt will get into there, but is it okay to fill up with clay over the top of the on/off valve? It's been a nightmare with him saying he'd come out and he wouldn't show or he'd show up and forget parts. Oh well...hope it is all over now. My question is, is it normal to have heads sunk in dirt? Is it normal for the backflow valve junctions to fill half way with dirt and they will not be damaged? Also he installed the heads going down the driveway right next to the concrete so there is no way to edge -- do they make concrete or plastic donuts in semicircle shapes that can be pushed against a driveway? This process has been a huge PITA.