You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 3688 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Monday, May 12th 2008, 10:31am

by North Tx JIm

I would'nt use WD40! water is the lubricant for the heads and wd40 will only shorten the life span of the head. it sounds like dirt is stuck in the body of the sprinkler. Is the sprinkler below grade?

Thursday, August 23rd 2007, 6:31am

by igneous

I have one doing the same thing and prolly because it's leaking. Lower pressure means when the valve shut that station off, the leak cause it to lose vacuum and not go back down. You can simply push them down with your hand--WD40 might help that.

Tuesday, June 19th 2007, 11:40am

by jjgriffmn

sprinkler head stays up?

I'm sure there's an easy remedy for this?

I have a coulple of sprinkler heads that stay up. I'm affraid I'm going to take one off with the mower.


Thanks a lot,