You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2633 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 5 posts

Wednesday, June 6th 2007, 8:10am

by ernbark

Thanks you for your informatiom very-very helpful. Setting up the one start time took care of my problem. Thanks to all.

Wednesday, May 30th 2007, 7:56am

by Bill Painter

Perhaps to clarify a bit further, each "program" is like a separate clock. The only thing they have in common is knowing what the date and time are.
Each PROGRAM has it's own start time(s), individule run times per zone, and days to run. ONE start time per day usually suffices for most sprinkler applications.
Any zones assigned to a specific PROGRAM start on the assigned days and run SEQUENTIALLY after the program starts on those given days.

Like Boots sez.... Don't fall into the trap of trying to assign a start time for each zone. It doesn't wotk that way.

Wednesday, May 30th 2007, 2:50am

by SprinklerGuy

Classic programming error....


Tuesday, May 29th 2007, 3:53pm

by Wet_Boots

1-e? Numbers are for zones. Letters are for programs. You often can get by with only the A-1 start time, with the rest being off. That's program A, start time 1 ~ if all your zones are assigned to program A, then the A-1 start time will trigger a cycle of watering that includes all the zones. Don't fall into the trap of trying to assign a start time for each zone. It doesn't wotk that way.

Tuesday, May 29th 2007, 8:36am

by ernbark

keeps cycling.

I have a hunter icm-800-icc with a 8station exspansion module. When the controller calls for the zones to come on to cycle through 1-a,1-b,1-c,1-d and 1-e they stay on cycle in sequince time after time. I have done a factory reset that didn't fix it. do I need to try a new controller or replace the expantion module. or what.