You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4049 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 10 posts

Thursday, May 24th 2007, 6:40am

by ufalco

i desided on the hunter pro. i got them yesterday and i'm very impressed. thanks guys for all of your suggestions i'm very happy.

Friday, May 11th 2007, 2:03pm

by jmduke7

No. they are not the same. Close, but not close enough.... I would suggest changing them out to either a Hunter Pro Spray or a Rain-Bird 1800 series Spray. The SRS Series was notorious for this very problem. You want to look for a spray body that offers a slip / click adjustment clutch. It will be the extra plastic piece at the bottom of the spring on the riser / piston body.

Friday, May 11th 2007, 3:39am

by ufalco

one more thought.
yes i do use srs hunter spray, sois either the Hunter Pro Spray or a Rain*Bird 1800 Series spray body same as hunter srs. because i have a good # of the guts the pop up and spring and all of the srs stuff.would i be able to use those in the new spray as a spare part

Thursday, May 10th 2007, 4:51am

by ufalco

ok thanks to all. last night i rechecked and notice the inside of the body the groves(tabs) were worn out at the top of the head body unit. i'm sorry i did not understand earlier reply from gregory1420. it would have save me a few days.part of learning thanks again to all

Wednesday, May 9th 2007, 8:04pm

by lush96

hunter adjustable sprays will sometimes open up more or close if the pressure is high. never use an adjustable hunter spray as a full circle as they tend to "close" under high pressure. they supposedly fixed this problem but i dont believe it as i have had problems from customers who have these heads still to this date.

Wednesday, May 9th 2007, 6:41pm

by jmduke7

Are they the Hunter SRS series Sprays? If they are, I would replace the whole thing, not just the internals. Try and go with a Hunter Pro Spray or a Rain*Bird 1800 Series spray body.

Wednesday, May 9th 2007, 4:39am

by ufalco

ok i finally inspect those pop up and they look ok. i replace the inside of the heads with new popup and spring just in case. i have 5 hunter head with rainbird spray on these zone and two of them everytime a new cycle starts the spray is pointing not in the direction a place them. any help please i'm going insane i can't believe that is happing only on those two heads in all of my 5 zones.

Friday, May 4th 2007, 3:34am

by ufalco

i replace the inside of the pop up one already i'll inspect the all think thanks.

Thursday, May 3rd 2007, 4:23pm

by gregory1420

maybe the plastic bottom of the pop up is broken the little tabs in the body maybe there are no tabs left

Thursday, May 3rd 2007, 6:32am

by ufalco

pop up problem

i have a 4" pop up hunter head it seem and it started not to long ago
that every time it ups up i found the spray in a different position. i manual adjusted with no success.i replace the inside of the head and left the body there.problem still persist.any idea or help will be appriciated thanks in advance. [:(]