You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2847 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Thursday, October 12th 2006, 6:37pm

by Wet_Boots

Atmospheric vacuum breakers need to be at least half a foot higher than the highest pipe or head downstream of the device. Do not fudge on this.

Thursday, October 12th 2006, 5:37pm

by mrfixit

Hi there, here's a quote:

"PVB's must be installed such that the water supply to the sprinkler system goes through the PVB before supplying the sprinkler system valves. Furthermore, the device must be installed at least 12 inches or more above the highest sprinkler head or shrub riser."

It's the same for ASV's. But check with the city for local codes.
http://www.sprinklerwarehouse.com/detail.aspx?ID=585

Good luck!







Thursday, October 12th 2006, 4:03pm

by doinitmyself

Anti-siphon valves

****o, I have a question about anti-siphon valves. I installed my valves 10-12" above my highest lawn sprinkler heads(when in the closed position).I have a 3rd zone that goes just to flowerbeds and will run bubblers, drip lines, and shrub heads atop 18-24" schedule 80 nipples. Some of these are around the height of my anti-siphon valves. Getting to the point, do only lawn sprinkler heads apply to the valve height rule? Thanks.