You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4328 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Saturday, August 12th 2006, 9:43am

by Wet_Boots

Suction line leaks are the most important thing to check for. Be absolutely certain that there are no suction line leaks or check valve problems.

Saturday, August 12th 2006, 5:13am

by iguanabob69

Pump losing prime

I have a six zone system that draws the water from a pond behind my house. The elevation from the water source to the pump is about 6 feet. The pump is a 1-1/2hp pump. I can prime the pump and water all six zones. Next time I go to use the system, it seems that the pump has lost its prime and I have to re-prime it. I don't want to leave it on automatic with the system in this state. I don't want to burn up my pump. This problem started recently atfer I replaced the wiring from the timer to the valves. Any ideas out there?