You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4348 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Saturday, July 22nd 2006, 9:15am

by IanMcP

Do you have a well or town/city water

Monday, July 17th 2006, 5:39am

by Wet_Boots

Besides replacing the entire valve, which might have some debris clogging something, you could also get a Nelson valve with a flow-control top, use the top to replace the existing one, and throttle it down if it sticks open.

Monday, July 17th 2006, 5:09am

by kclough

Nelson valve issue

I have a Nelson valve that will not shut off. At the beginning of the season it started. I have replaced the solenoid, taken the valve apart (no cracks or dirt) and checked the voltage (fine-24v). Still have the problem....HELP!!, I can not run my system, becuase if I turn it that zone continually runs. The rest will barly run with the timer on.