You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4641 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Friday, July 7th 2006, 4:38pm

by Wet_Boots

Some PVBs are more pressure-sensitive than others. You might thread a pressure gauge into a testcock on the PVB, and note what pressures the problems occur at.

Friday, July 7th 2006, 1:04pm

by djoles

Toro PVB

I have a Toro PVB model 53300 and it frequently trips causing it to purge continuously until shut off and reset. It does this on a zone with mostly soaker hose and also when the city pressure drops due to water demands. Is the flow a big deal, the regular operating rate is around 9 gpm but drops to about 4 when theres alot of water usage; this models gpm range starts at 5, is that a big deal. I don't know where to start? The unit was new this spring and I had one at a previous home and never had issues.