You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 3069 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The first post

Tuesday, June 27th 2006, 1:12pm

by JimD

Which valve is best

<b>I have designed a system for my farm and need to use 1 1/2 inch valves.

There are several on the site to pick from. Is one better than the others? </b>

I have a simple design of 1 1/2" PVC main line with four zones of 1 1/4 PVC pipe servicing 4 hunter pgp sprinkler heads on each lateral line. The main line drops 15 feet from the tank house.

The system is river run FW 1 1/2 horse, 27 gallon per minute submersible pump with a total rise from the river of of 66 feet and run length of 500 feet to the 119 gal wel-x tank. The system splits for the house and yard at this point and the 1 1/2 line starts.