You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4378 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Sunday, June 25th 2006, 7:20pm

by xpedient

You can dig up the head and risor, remove the fitting it is attatched to and install a new type of fitting based on your needs. You will have to run a section of 1" or 3/4" poly pipe to the new area and then put an end elbow in with a risor and attatch the head. If you are only moving the head a few feet a swing set up would be better...

Saturday, June 24th 2006, 1:06pm

by mrtrumpet

New To Sprinkler System. Need to move Heads

I have a 25 year old Rainbird System. Most everything seems to work well. But I need to move some heads because they're no where near where the current needs are.

I dug up one head and see it attached to a hose, but I'm not sure how to extend the hose to the new area and reattach the head.

Can anyone explain what I need to know in order to be able to order the right parts to extend the various heads to new areas?