You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4378 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Sunday, June 25th 2006, 7:04pm

by xpedient

You can goto a rental store and rent a valve finder. It traces the current in the ground to the valve. once you find it the diaphragm needs to be replaced.

Saturday, June 3rd 2006, 2:47pm

by ram garcia

water valve control location

have 4 sprinklers that will not cut off..have gone through all 15 stations to turn off and have unplugged power to valves and they still continue to run...finally turned main control valve off and they stopped but as soon as I turn it back on they start up again...everthing points to the valve controlling these 4 problem is locating the valve...I know it's in the ground (have located other boxes on sides and back of house)... sprinklers are in the same general area (40 ft square area). I've been poking around with a piece of rebar to see if I can locate it but no luck. Any other suggestions on how I might be able to find it?? thanx.....