You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4375 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 5 posts

Sunday, June 25th 2006, 7:32pm

by xpedient

As long as your soil is not too rocky as that will cause scores in your pipe which could later lead to breaks..

Saturday, June 3rd 2006, 4:14am

by jamiewoodhead

So, wire like this: wrapped in duct tape should work fine?

Monday, May 29th 2006, 3:43am

by Wet_Boots

Pros use 'irrigation cable' which has a tough polyethylene outer jacket, which will withstand being pulled by a plow. If you only have thermostat cable, the safest way to go is to use an extra pipe as a conduit for the wire.

Sunday, May 28th 2006, 9:59am

by jlease

Use the multi-stranded wire and duct tape the bejesus out of it to the end of the poly, put them both in the chinese finger, and pull them both at the same time.

Sunday, May 28th 2006, 3:50am

by jamiewoodhead

Installing remote zone

I am installing an irrigation system at my house and am unsure how to run the poly-pipe and valve wire. I will be renting a vibra-plow to pull polly pipe. Do I need pull two sets of pipe out to the box, one for the wire and one for water? Or, can I wrap the wire around the poly pipe and pull it?