You are not logged in.

  • Login
  • Register

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 3958 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Sunday, August 18th 2002, 10:03am

by nestors

Is there 120 volt power to Clock ?Check with a VoltMeter @ outlet on wall where transformer is plugged in . Is it a GFCI ? push button.

Are the valves getting 24 volts ? if not the wires are broken from clock to valve(s).

Nestor's Alharetta ,Ga. vpn1@attbi.com

vincent nestor

Sunday, August 4th 2002, 4:56pm

by RVLI

Is your shut-off valve on? Is there a main valve? A little more info. here please.

Sunday, August 4th 2002, 7:33am

by K. J. Hodson

Sprinklers won't turn on

I had installed a sprinkler system about 7 years ago using Nelson products with a six zone control panel. This has been a rental unit for six years and my tenant never used it. I found several sprinkler heads either broken or missing. I replaced them and installed new batteries in the controller and manually turn on one zone and nothing happened, so I tried another zone. Same thing. I then went to the valves and noticed that they were buried and cleaned out all the dirt around them. Everything looks okay. So now I don't know what to check for. Any ideas?

Ken