You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2908 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 7 posts

Wednesday, May 3rd 2006, 5:42am

by Tom

I never give material cost only total project cost and a listing of the material used.


Wednesday, May 3rd 2006, 4:29am

by bobw

I think that you've answered your own question here. You found a contractor you like and who seems helpful. I'd stop right there. The few hundred dollars you may save with contractor 1 is likely not worth the trust factor of contractor 2.

I no longer give line item quotes to customers; much less individual product prices. A LOT of customers use that as a shopping list and the reality is that I give a service. I'm not going to price match Home Depot, etc; people want the cheapest products, then they can deal with the headaches caused by them and install the parts themselves. When I give an estimate, I will describe the individual zones (left side of house, rear flowerbed) and a total price.

Tuesday, May 2nd 2006, 3:38pm

by psulioninks

OK...take a look at these two quotes...

Vendor 1

Rotors Rainbird 5000 14@ $18.00 = $252.00
Sprayers Rainbird 21@ $6.00 = $126.00
Valves Rainbird 7@ $32.95 = $230.65
Wire 14 Guage 700@ $0.12 = $84.00
Controller Rainbird ESP 8 1@ $160.00 = $160.00
Backflow Watts PVB 1@ $169.00 = $169.00
Main Line PVC Class 2000 80@ $0.33 = $26.40
Laterials PVC Class 2000 850@ $0.33 = $280.50
Miscellaneous Fittings & Glue 1@ $140.00 = $140.00
Labor 52@ $32.00 = $1,664.00

Total $3,132.55

Vendor 2 (no price per items)

Rotors Hunter I-20 (25)
Sprayers Hunter Mist (16)
Valves Zone Valves (8-9)
Wire Unknown (Unknown)
Controller Hunter Pro-C (1)
Backflow 1" FEBCO PVB (1)
Main Line PVC (Unknown)
Laterials PVC (Unknown)
Miscellaneous Fittings & Glue (Unknown)
Labor (Unknown)

Total $3,500.00

The second vendor did not break out the costs per item as the first, but I don't know if that is really important.

Quite a difference between the number of rotors/sprayers in each quote. The second vendor mentioned that their design would prevent any (I believe he said "blanching" of the yard). Does this mean head-to-head coverage?

One thing that concerns me is that both bids use PVC piping - not poly. I am in the midwest (Kansas City), should I be concerned about this. When I asked the second vendor about this, he said as long as the system was winterized, there would not be any problems.

One thing I liked about the second vendor (aside from his suggestion of Hunter products) is he said they would show me how to activate the system every spring - thus saving me a service call to get the system ready for use. I think they charge $55.00 to winterize it, which seemed very reasonable. He also said if I had an air compressor, they would show me how to blow out the system each year so I would not have to pay for any maintenance.

Any thoughts, opinions?

Thursday, April 20th 2006, 2:58pm

by RidgeRun05

Yes, it is alright to post your qoutes, minus the contractors names. We will be more than happy to help steer you in the right direction. As far as brands go, every contractor has their own opinion, but anything of professional grade is a good start.

Wednesday, April 19th 2006, 6:22pm

by psulioninks

<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by Wet_Boots</i>
<br />So, should I buy that Marantz 10B tuner at the thrift shop, with its $35 price tag? [:D]<hr height="1" noshade id="quote"></blockquote id="quote"></font id="quote">

Ummm...if you don't, I will! [:p]

Wednesday, April 19th 2006, 5:35pm

by Wet_Boots

So, should I buy that Marantz 10B tuner at the thrift shop, with its $35 price tag? [:D]

Shop contractors first, then worry about the equipment they use.

Wednesday, April 19th 2006, 4:34pm

by psulioninks

Quote & Part Opinions

Hi All!

I ran across this site doing research for irrigation systems, and there seemed to be some excellent opinions here, so I thought I would join.

My wife and I have lived in our house (which we built new) since 1993. Our yard has always been a neglected piece of #*$^, and we both want this to change.

So, we are going to work on keeping the weeds under control and kill the lawn off this fall and start from scratch. We both think that having an in-ground sprinkler system combined with scheduled lawn service will help us finally get a yard we can both be proud of.

So, knowing nothing about brands, equipment, etc. we are in the process of getting quotes from several different companies in the Kansas City area for our yard which is somewhere between 7,100-7,500 sq ft.

We will probably live here another 4-5 years before moving.

So...

Would it be wrong to post some quotes on here WITHOUT the name of the companies who have bid on our project? What I am looking for is opinions on the parts/costs so that I can make the best decision.

I really have NO experience with this stuff. I want a system that will not require a lot of maintenance and that is dependable. That said, I don't necessarily need the best that there is, but who knows, maybe one of the quotes will really stand out based on items/costs.

Your thoughts?

Anyone willing to help me out here?

By the way, I know A LOT about audio/stereo equipment. So if anyone needs some help getting steered in the right direction in that area, I would be happy to lend a hand! [:)]

Brad