You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 3042 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Sunday, June 25th 2006, 7:40pm

by xpedient

1) I like Poly for lateral lines.

2)1" poly should be good, but I am not sure how many heads you can run. Rainbird 5004 uses quite a bit of water and you need to calculate your Gallons per minute. Fill up a 5 gallon bucket and time how long it takes you...

4) I would stick to under 3 feet because you are going from 1" poly pipe to 3/8" swing pipe and that cuts down significantly especially with a rainbird 5000 which demands quite a bit of flow to run correctly.


Thursday, April 13th 2006, 5:11am

by rkokoski

New Install Need Expert Advice

OK, this can be long but I have some hopefully simple questions in order for me to finish my design. I am installing a new system in the Maryland area covering about 1 acre. I have my design pretty much finished but some simple questions.

1. In Maryland am I better off using PVC piping vs. Poly? I would think Poly is easier to install because of the flexibility but the PVC is stronger.

2. Should I be using ¾’’ or 1’’ for my piping of main lines and lateral lines? With my pressure (45 PSI) and max # heads/per zone (4 max, Rainbird 5004) I am thinking I am fine with ¾’’

3. I plan on using funny pipe with barb connections to connect my heads to the lateral lines. Any other thoughts or things to keep in mind here? Hints on connecting the pipe to the barbs to make sure they stay in?

4. With the funny pipe connections what is the max length I can extend the funny pipe? This will let me know how much flexibility I have in laying my lateral lines.

Thanks for any help and advice!!!

-RKokoski