You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 3069 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 5 posts

Tuesday, April 4th 2006, 2:37pm

by Fertigation Guru

If you decide to use poly pipe check out Tom Kings Blazing Saddles, they are quick and easy.

Saturday, March 25th 2006, 3:59am

by SprinklerGuy

Good explanation lush

Friday, March 24th 2006, 8:19pm

by lush96

if depends on your sprinkler service size. is the service that is going to your sprinkler system 3/4" or 1". it is usually on or the other. whatever the size you will lose no pressure or flow by sticking with the same size. in other words.....if your sprinkler main and manifold are 1 inch.....stick with one inch. if it is 3/4.....you can safely stick with 3/4. but using 1 inch like tom suggested is a good way to go even if it is 3/4 inch service. i inch fittings and pipe are the way to go these days with the availability of products. but just to clarify it wont make any difference sizing up to 1 inch if you are working from a 3/4 inch main as far as pressure and flow are concerned. my company always uses one inch regardless becuase it is more common and with new houses all having 1 inch service it is just better to stick with one size for both. tom is right to tell you to use poly pipe as it is more resilient to freezing. also a whole lot easier to work with. check with your local code though. some areas demand you use pvc.

Thursday, March 23rd 2006, 12:23pm

by Tom

I'd upsize to 1" poly or pvc. If your in a cold climate were the system is blown out every year I'd use poly pipe.

If your able to, start with new 1" pipe from your new valve.



Thursday, March 23rd 2006, 6:23am

by bryce77

Help with new zone

I have an older system that I just replaced the old manual valves with automatic valves. One of the valves controls what is now a hose spicket. It is connected to 3/4 pipe. I would like to take that out and put in 4 rotor heads. I would have to trench in new pipe. My question is how do I do this? Continue with 3/4 inch pipe? PVC or poly? Any help would be great.

Bryce