You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4660 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Thursday, January 19th 2006, 4:03am

by Wet_Boots

You probably have to look at the mechanical valve that should be switching you from one zone to the next when you apply the water pressure to it, as controlled by that Intermatic timer.

Tuesday, January 17th 2006, 5:14am

by spensito

did I mess up the "zone order"?

Hi all. BRAND NEW to sprinkler systems. But knew just enough to sequence thru the 4 zones manually to check out head operation. Is there such a thing as "this zone must go first"? That is, if you manually switch zones with the selector switch, do you have to make sure you leave it where it left off after the last automatic watering?

Since I messed with it, I've had 1) the same zone get selected over and over on automatic 2) the same zone selected as both first AND fourth, skipping a zone.

I have an intermatic R8806P101C with skipper.

Thanks in Advance


{posted here after realizing it doesn't belong in "choosing the right equipment" forum}