You are not logged in.

  • Login
  • Register

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2891 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Thursday, June 23rd 2005, 2:46pm

by Wet_Boots

The U-series nozzles are an evolving product. They now catalog them down to 8-foot radii, so I expect they are here to stay. The design concept hearkens to brass nozzles, which often had a slot machined into them, for close-in coverage.

Tuesday, June 21st 2005, 12:18pm

by RidgeRun05

I'm glad it helped to temporarily "fix" your problem. I don't have a whole lot of experience in the Rain-Bird products (install Hunter systems), but I have serviced a few systems with the U series, and they seem to work pretty well.

Tuesday, June 21st 2005, 10:21am

by malibu jim

Rainbird U-series Nozzle

I haven't seen any comments on the U-series nozzles from rainbird (the ones with the double orifices ). I just put a couple in my front lawn where I didn't have overlapping coverage, and they seemed to work great. I realize that if I had the overlap I probably wouldn't need them, but this system was installed 20 years ago, and needs to be redone. In the meantime, this seems to have fixed the bare spots in front of the heads.